Quick Summary
The EDELRID Ohm is an assisted-braking device for lead climbing. It increases rope friction in a fall and is intended for situations where the lead climber is heavier than the belayer. This Oasis version is specified for single ropes from 8.9 to 11 mm.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Product type | Assisted-braking resistor for lead climbing; it increases rope friction when the climber falls. |
| Model and color | EDELRID Ohm, model ER72070, in Oasis. |
| Rope compatibility | Single ropes from 8.9 to 11 mm. |
| Recommended weight difference | The lead climber is 10 to 40 kg heavier than the belayer. |
| Minimum belayer weight | 40 kg. |
| Attachment point | Attached at the first bolt in the safety chain. |
| Weight | 470 g. |
| Marking and part number | CE 0123; part number 720700001380. |
How It Works
When the lead climber falls, the Ohm increases friction on the rope. The supplied product details state that this reduces the hand-braking force needed to arrest a fall and makes lowering a heavier climber easier to control. They also state that the device adds no friction when paying out rope. These points describe the device’s stated function, not a guarantee of a safe outcome.
Compatibility, Size and Fit
Check that the rope is a single rope with a diameter from 8.9 to 11 mm. The recommended weight difference is 10 to 40 kg, with the climber heavier, and the belayer must weigh at least 40 kg. The device attaches at the first bolt in the safety chain; confirm that placement and the requirements for the exact setup in the manufacturer’s instructions.
What to Compare Before Buying
- Rope type and diameter: Confirm the rope is a single rope within the 8.9 to 11 mm range.
- Belayer and climber weights: Check the 40 kg minimum belayer weight and the recommended 10 to 40 kg difference.
- Route and attachment: Check whether the first-bolt attachment described for the Ohm fits the intended setup, following the manufacturer’s instructions.
Safe Use and Important Precautions
The supplied details state that the Ohm can reduce the risk of a possible ground fall if the lead climber falls at the first bolt. This is a risk reduction claim, not a guarantee that a ground fall or other accident will be prevented. The product details do not provide a complete installation or operating procedure. Read and follow the manufacturer’s instructions for attachment, rope handling and use, and do not rely on the device outside its stated rope and weight limits.
Before You Decide
Confirm the rope type and diameter, the belayer’s weight, the climber-to-belayer weight difference and the attachment requirements for the intended setup. Follow the manufacturer’s instructions before using this climbing device.











Reviews
There are no reviews yet.