Quick Summary
The 9KM DWLIFE Prusik Loop is a pre-sewn 8 mm polyester friction loop, measuring 75 cm (30 in) and rated at 24 kN maximum breaking strength. It is described for use in compatible rope systems, including friction hitches for rope grabbing, progress capture and rappel backup.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Type and construction | Pre-sewn Prusik loop made from high-tenacity polyester; the sewn loop avoids tying the loop yourself. |
| Cord diameter | 8 mm (5/16 in). Check the diameter and construction required by the rope system you plan to use. |
| Length | 75 cm (30 in). Confirm this length suits the intended hitch and setup. |
| Rope compatibility | Described for ropes measuring 11-12.5 mm (7/16-1/2 in); confirm compatibility with the exact rope and system. |
| Strength and material | 24 kN maximum breaking strength; high-tenacity polyester. The strength figure is not a working-load rating. |
| Color and quantity | Fluorescent green; one loop. |
Key Features Explained
The loop is described for friction hitches such as Prusik, Autoblock and Klemheist, and for applications including rope grabbing, progress capture and rappel backup. These uses depend on the particular rope system and its requirements.
A transparent heat-shrink sleeve covers the stitched connection and leaves the stitching visible for inspection. The product information does not provide inspection criteria, so follow the equipment manufacturer’s instructions.
Compatibility, Size and Fit
The stated rope range is 11-12.5 mm, paired with an 8 mm loop. Check both diameters against the requirements for the exact hitch and rope system; the stated range does not establish compatibility with every rope or setup. The 75 cm length is another fit consideration.
What to Compare Before Buying
- Rope diameter: Check that your rope falls within the stated 11-12.5 mm range and that the complete system allows this loop.
- Loop diameter and length: Confirm that 8 mm and 75 cm suit the intended configuration.
- Strength requirements: Treat 24 kN as the stated maximum breaking strength, not as a working-load rating or proof of suitability for a specific application.
- System and use: Confirm the knot, rope combination and intended application against the equipment manufacturer’s instructions.
Important Limitations
A strength figure alone does not establish that the loop is suitable for a particular climbing or rope system. The product details do not provide operating instructions or inspection criteria. Use the instructions for the exact equipment and system rather than relying on the strength rating alone.
Before You Decide
Check the intended system’s requirements for the 8 mm loop, 75 cm length and 11-12.5 mm rope range. Confirm the application and safe-use instructions for the exact equipment before use.
Reviews
There are no reviews yet.