Quick Summary
The FJXMMT 24 Pack .244/6.2mm Aluminum Arrow Inserts are glue-in inserts for carbon arrow shafts. They are made for shafts with about .244-.246 inch / 6.2 mm inner diameter and about .299 inch / 7.6 mm outer diameter, and they use standard #8-32 internal threads.
This pack includes 24 aluminum inserts. Each insert weighs about 0.8 g, or about 12 grains, which is a useful detail for buyers comparing arrow setup weight and replacement quantity.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Product type | Arrow inserts for carbon arrows. |
| Pack quantity | 24 inserts for replacing multiple shafts or keeping extras on hand. |
| Shaft fit | Made for carbon shafts with about .244-.246 inch / 6.2 mm inner diameter and about .299 inch / 7.6 mm outer diameter. |
| Thread size | #8-32 internal thread for compatible screw-in points, arrow tips and broadheads. |
| Weight | About 0.8 g each, or about 12 grains. |
| Installation | Glue-in style installation for compatible carbon arrow shafts. |
What to Compare Before Buying
- Shaft fit: Compare the inner and outer diameter of your carbon shafts against the stated .244-.246 inch / 6.2 mm ID and about .299 inch / 7.6 mm OD.
- Thread size: Check that your screw-in points, arrow tips or broadheads use #8-32 threads.
- Pack quantity: The 24-count pack matters if you are replacing several inserts or setting up multiple arrows.
- Insert weight: Each insert is about 0.8 g / 12 grains, so compare that figure with the arrow setup you want.
- Installation method: These are glue-in inserts, so confirm that matches your preferred arrow setup process.
What Else You May Need
You will need a suitable arrow insert adhesive for installation. You will also need compatible #8-32 screw-in points, arrow tips or broadheads if those are part of your setup.
Before You Decide
Confirm the shaft diameter, thread size and glue-in installation method before choosing this pack. The 24-count quantity is also important if you only need a few replacements or are setting up multiple arrows.
Using It in Practice
For a straightforward setup, match the insert to the shaft size first, then install it with the proper adhesive and allow full cure time before attaching a compatible point. That keeps the focus on fit and the exact thread standard used by the arrow setup.
Reviews
There are no reviews yet.