Quick Summary
The WELKFORDER WFL011E is a single-leg fall protection lanyard with a 6-foot length, shock absorber, stretchable construction, and double snap hook connectors. It is stated as ANSI Z359.13-2013 compliant and intended for fall protection use.
The product description also states a 130 to 310 lb user capacity range, a maximum deployment distance of 48 inches, an average arresting force of 900 lb, and a minimum breaking strength of more than 5,000 lb. Because this is safety-critical equipment, confirm the exact model, intended use, and compatible harness setup before choosing an offer.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Brand | WELKFORDER. Helps identify the exact product family. |
| Model | WFL011E. Useful for matching the exact lanyard version. |
| Product type | Single-leg fall protection lanyard with shock absorber and snap hooks. |
| Length | 6 feet. Check that the working length matches the intended setup. |
| Capacity range | 130 to 310 lb. Compare this with the user and carried gear. |
| Maximum deployment distance | 48 inches. This matters for clearance planning. |
| Average arresting force | 900 lb. A key specification for fall protection comparison. |
| Minimum breaking strength | More than 5,000 lb. Important for rating comparison. |
| Compliance | ANSI Z359.13-2013. Relevant for buyers comparing fall protection standards. |
| Connector type | Double snap hooks. Check connection requirements for the harness and anchorage. |
What to Compare Before Buying
- Capacity range: The stated range is 130 to 310 lb, including clothing and tools. Compare that with the intended user and carried gear.
- Clearance needs: The listed maximum deployment distance is 48 inches. Make sure the working area allows for that movement in the event of a fall.
- Connection setup: This model uses double snap hooks. Confirm that the harness and anchorage connection points match the lanyard configuration.
- Standard and rating: Compare the ANSI Z359.13-2013 compliance, arresting force, and breaking strength with the requirements of your job site or safety plan.
- Length: The 6-foot length affects working reach and setup geometry. Check that it fits the intended application.
Setup and Correct Use
The shock-absorbing end is intended to connect to the dorsal D-ring of a full body harness. The opposite end is intended to connect to the anchorage connector. The product description also says this fall protection equipment must be used by a competent person, or by a user who has read, understood, and been properly trained on its limitations and proper use.
Before You Decide
Confirm the exact WFL011E model, the 6-foot length, and the stated capacity range before choosing an offer. Check that the double snap hook configuration matches your harness and anchorage setup. Because this is fall protection equipment, also make sure the ANSI Z359.13-2013 compliance and deployment distance fit your job requirements and safety plan.
Reviews
There are no reviews yet.