Quick Summary
These NUWAB flat platform pedals are supplied as a pair and have 9/16-inch axle threads. Each pedal has a nylon-composite body, a concave platform and threaded pins. Check that the thread size matches your bike’s crank arms before choosing them.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Type and quantity | Flat platform pedals, supplied as one pair. |
| Axle thread | 9/16 inch. Confirm this matches your crank-arm thread size. |
| Platform | Listed as 4.89 x 4.4 inches and described as concave. Compare the size with your preference and available clearance. |
| Body | Nylon-composite material; black. |
| Pins | Eight threaded pins on each side of each pedal. The listing says their height can be adjusted and they can be removed with a 2.5 mm Allen wrench. |
| Bearing arrangement | Bearing and DU bushing. The listing notes initial stiffness and says the pedals become smoother with use. |
| Listed item weight | 0.77 lb. |
Key Features Explained
The concave platform and threaded pins are the main contact-surface details to consider. The pins can be adjusted or removed, but no pin-height range is given. Think about whether this pin setup suits your footwear and riding preferences.
The bearing-and-bushing arrangement may feel stiff initially, according to the listing. Do not assume a freely spinning feel straight out of the package.
What to Compare Before Buying
- Thread size: Check that your crank arms use 9/16-inch pedal threads; bike type alone does not confirm fit.
- Platform dimensions: Compare the listed 4.89 x 4.4-inch platform with the size you want and check available clearance.
- Pin setup: Consider the threaded pins and their adjustable height. The listing does not specify an adjustment range.
Compatibility, Size and Fit
The listing describes these pedals as fitting most bikes, but that does not establish fit for every crank arm. Confirm the thread size before installation. No alternate thread size is specified.
What Is Included
The package is listed as one pair of pedals, one 6 mm Allen wrench, two 2.5 mm Allen wrenches, 16 nuts and 16 screw pins. Check the selected package contents if any of these items are important to your setup.
Setup and Correct Use
The pedals are marked L and R and use a 6 mm Allen wrench for installation and removal. Start each pedal by hand with the threads aligned: turn the right pedal clockwise and the left pedal counterclockwise. After each is initially secured, tighten it with the Allen wrench. No tightening torque is specified.
Before You Decide
Confirm the 9/16-inch thread matches your crank arms, compare the platform dimensions, and review the listed package contents. Consider whether the threaded pins and the described initial stiffness suit your preferences.
Reviews
There are no reviews yet.