Quick Summary
TotalBoat Aluminum Boat Paint is a one-part polyurethane marine paint in Army Green, sold in a quart size. It has a low-sheen finish and is intended for aluminum and galvanized metal. The paint can be used above or below the waterline.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Color and size | Army Green, quart. The description also lists other colors and gallon sizes, but this variant is the quart in Army Green. |
| Paint type and finish | One-part polyurethane with a low-sheen finish. |
| Surfaces and use | For aluminum and galvanized metal; use above or below the waterline. |
| Coverage | Typical coverage is 80-100 square feet per quart. |
| Application | Apply 2-3 coats by brush, roller, or spray. The paint can be thinned up to 20% with water as needed. |
| Formula and cleanup | Chromate-free, with low VOCs and low odor. Cleanup is with soap and water. |
What to Compare Before Buying
- Surface: Confirm the surface is aluminum or galvanized metal, the surfaces named for this paint.
- Quantity: Use the typical 80-100 square feet per quart coverage as a planning reference, allowing for the stated 2-3 coats.
- Color and finish: This variant is Army Green with a low-sheen finish. The description lists other colors, so check the selected color if choosing another variant.
- Application method: Brushing, rolling, and spraying are listed methods. Consider which method suits the project.
Setup and Correct Use
No primer is needed according to the product information. Apply 2-3 coats by brush, roller, or spray. At 72 F, another coat can be applied after 1 hour without sanding between coats. The description recommends preparing surfaces with TotalBoat Aluminum Boat Etch Wash for maximum adhesion. Thin with water, up to 20%, as needed.
What Else You May Need
TotalBoat Aluminum Boat Etch Wash is identified as a surface-preparation product for maximizing adhesion. It is a preparation recommendation, not a stated requirement for every application.
Before You Decide
Check that Army Green in a quart is the desired variant, that the surface is aluminum or galvanized metal, and that the typical coverage and 2-3 coat application suit the project.
Reviews
There are no reviews yet.