Quick Summary
These OCEANBROAD dock bumpers are a blue, pre-inflated 3-pack for mounting along a dock edge. Each measures 15.4 x 6.5 x 5.3 inches when inflated. The listed uses include pontoon and tritoon docks and boathouses; the dock side must be flush for mounting.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Pack and color | Three blue dock bumpers. |
| Inflated dimensions | 15.4 x 6.5 x 5.3 inches per bumper. |
| Material | 5 mm thick marine PVC with reinforced ribs. |
| Mounting hardware | The title specifies 304 stainless steel hardware; the description lists 12 screws and washers per 3-pack. |
| Inflation | Pre-inflated, with a needle valve for adding air. |
What to Compare Before Buying
Check the inflated dimensions against the dock edge and the space where the bumpers will be mounted. The dock side needs to be flush. The product is listed for pontoon and tritoon docks and boathouses, but confirm that the mounting surface on the specific dock meets this fit requirement.
The description recommends 2 pieces for docks under 10 feet, 3 to 4 for 10 to 30 feet, 5 to 6 for 30 to 50 feet, and 6 or more for docks over 50 feet. The three-pack may not match every dock length.
What Is Included
The package is described as including three bumpers and 12 stainless steel screws and washers. The description identifies the hardware as stainless steel, while the title specifies 304 stainless steel.
What Else You May Need
The bumpers arrive pre-inflated. If you want to add air, the description says a ball pump can be used with the needle valve; a pump is not included.
Setup and Correct Use
The bumpers are intended to be mounted permanently to the dock with screws. A screwdriver is identified for installation. Do not over-inflate if adding air.
Before You Decide
Confirm the dock side is flush, check the inflated dimensions and determine how many bumpers suit the dock length. Also note that a ball pump is not included if you plan to adjust firmness.
Reviews
There are no reviews yet.