Quick Summary
The ISURE MARINE 12V Automatic Submersible Boat Bilge Water Pump is a bilge pump with a stated 1200GPH flow rate and a built-in auto float switch. It is described as a fully submersible electric pump with automatic on and off operation based on rising and falling water level.
For buyers comparing similar pumps, the main checks here are voltage, flow rate, outlet size, wire lead length, and overall dimensions. The stated head is 2.5 m.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Product type | Automatic submersible bilge water pump for boat use. |
| Voltage | 12V, which needs to match the intended electrical setup. |
| Flow rate | 1200GPH, a key figure for comparing pump output. |
| Head | 2.5 m, a relevant check for the pumping setup. |
| Wire lead | 1 m wire lead, which affects placement. |
| Outlet diameter | 28.5 mm (1-1/8″), which must match the connected hose or fitting. |
| Dimensions | 155 x 90 x 115 mm, useful for checking available space. |
| Current | 3.5A, a useful electrical check for the circuit. |
| Switching | Built-in float switch, so no separate float switch is needed. |
What to Compare Before Buying
- Electrical setup: This pump is listed as 12V, so compare it with your boat’s power system.
- Output needs: The stated 1200GPH flow rate is the main figure to compare with the amount of water you want the pump to move.
- Connection size: Check the 28.5 mm (1-1/8″) outlet against your hose or fitting.
- Installation space: Compare the 155 x 90 x 115 mm dimensions with the available mounting area.
- Placement: The 1 m wire lead affects where the pump can be positioned relative to the power connection.
Compatibility, Size and Fit
This pump is intended for a 12V setup and uses a 28.5 mm (1-1/8″) outlet. Those two details matter most when checking whether it matches your boat and plumbing arrangement. The physical size, 155 x 90 x 115 mm, is also important if the installation area is tight.
What Else You May Need
A compatible hose or fitting for the 28.5 mm (1-1/8″) outlet, along with a suitable 12V power setup, may be needed for installation.
Before You Decide
Confirm the 12V electrical setup, the 28.5 mm (1-1/8″) outlet size, and the available installation space before choosing this pump. The built-in float switch is part of the product configuration, so you do not need a separate float switch for the stated automatic operation.
Reviews
There are no reviews yet.