Quick Summary
This 7 x 7-inch boat seat pedestal base is made for a standard nonthreaded 3/4-inch seat pin post. The base is aluminum with a gloss finish and an additional ring of reinforcing ribs.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Base size | 7 x 7 inches; check the available mounting area. |
| Post fit | For a standard nonthreaded 3/4-inch boat seat pin post socket. Confirm the post matches this type and size. |
| Construction | Aluminum with a gloss finish and an additional ring of reinforcing ribs. |
| Mounting openings | The described installation uses a 2.5- to 3-inch center opening and six screw holes. |
What to Compare Before Buying
Check the post diameter and confirm it is nonthreaded. Measure the mounting area and verify that the center opening and six screw holes can be placed as required for the intended installation. The base’s load rating is not specified, so confirm suitability for the intended seat and boat setup.
Setup and Correct Use
Installation calls for drilling a 2.5- to 3-inch opening and six screw holes so the base can fit flush to a bench or floor, then securing it to the deck. The post inserts into the center hole; the description states that the seat swivels and the post slides in and out. Confirm the correct fastening method for the mounting surface before installation.
Before You Decide
Check the 7 x 7-inch footprint, nonthreaded 3/4-inch post fit, and required openings. Confirm whether mounting hardware and the seat post are included, and verify the installation and load requirements for your boat.
Reviews
There are no reviews yet.