Quick Summary
The 15101-104 is a 9 x 12-inch standard trim tab kit for boats with dual rocker switches that control the port and starboard tabs independently. The listed recommended boat size is 16 to 25 feet.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Part numbers | 15001-101 and 15101-104 are both listed. |
| Tab dimensions | 9 inches long x 12 inches wide. |
| Recommended boat size | 16 to 25 feet. |
| Minimum beam height | 14 inches. |
| Planes | Two 12-gauge stainless steel blades with a 5/8-inch flared trailing edge. |
| Actuators and leads | Two 12V actuators with 6-foot leads and connectors. |
| Extension harnesses | Two 20-foot actuator extension harnesses with waterproof plug-and-play Deutsch connectors. |
| Switches and harness | Dual rocker switch kit and a 6.6-foot switch harness. |
What to Compare Before Buying
- Check that the boat falls within the listed 16 to 25-foot recommendation and that its beam height meets the 14-inch minimum.
- Compare the 9 x 12-inch tab dimensions with the requirements for the boat and the intended installation.
- Confirm the selected kit’s harness details: the switch harness is listed as 6.6 feet, while the actuator extension harnesses are 20 feet each.
Compatibility, Size and Fit
The listed boat-size recommendation is a guide, not a guarantee of how a particular boat will respond. The source notes that boats differ in weight, length, speed, and performance. Check the dimensions and minimum beam height against the specific boat before choosing this kit.
What Is Included
The listed contents are one dual rocker switch kit, two stainless steel blades, two 12V actuators with leads and connectors, and two actuator extension harnesses. The product title also specifies a 6.6-foot switch harness.
Safe Use and Important Precautions
The product information advises allowing time to learn how the boat reacts after installation. When adjusting the trim tabs, use short, light touches of the switch.
The switches are described from the bow position: the left switch controls the starboard tab, and the right switch controls the port tab. Check this orientation before making adjustments.
Before You Decide
Confirm the boat’s fit against the stated size recommendation and minimum beam height, and check the tab dimensions and harness lengths. The two part numbers are both listed for this kit; verify the exact item identification when selecting a configuration.
Reviews
There are no reviews yet.