Curious minds find more here.Shop smarter, all in one place.
US edition · USD

Harken Bullet Blocks Single Wire Bullet Block

The Harken Bullet Blocks single wire bullet block is a compact control line block with roller bearings and hardcoat-anodized PTFE impregnated aluminum sheaves. It has a 1 1/8 in. (29 mm) sheave diameter, a 5/16 in. (8 mm) maximum line diameter, a 500 lb (227 kg) maximum working load, and a 2000 lb (907 kg) breaking load.

View on Amazon
SKU: B006NVNZAW Category:

As an Amazon Associate I earn from qualifying purchases.

Quick Summary

The Harken Bullet Blocks single wire bullet block is a control line block for leading control lines aft. It is a compact, lightweight block with roller bearings for higher loads, and it uses hardcoat-anodized PTFE impregnated aluminum sheaves.

Key stated dimensions and limits include a sheave diameter of 1 1/8 in. (29 mm), maximum line diameter of 5/16 in. (8 mm), maximum working load of 500 lb (227 kg), breaking load of 2000 lb (907 kg), length of 2 in. (51 mm), and weight of 1 oz. (28 g).

Key Details

Detail Product information and buyer relevance
Brand Harken. Useful for identifying the exact block family.
Product type Single wire bullet block. This is the core product form to match against the intended rigging setup.
Sheave diameter 1 1/8 in. (29 mm). A key size check for the block itself.
Maximum line diameter 5/16 in. (8 mm). Compare this with the line size you plan to run.
Maximum working load 500 lb (227 kg). Compare this against the load your setup will place on the block.
Breaking load 2000 lb (907 kg). This is a separate load figure from working load and should not be confused with it.
Length 2 in. (51 mm). Useful when checking available space in the installation.
Weight 1 oz. (28 g). Helpful where low weight matters in the overall setup.

What to Compare Before Buying

  • Line diameter: The maximum line diameter is 5/16 in. (8 mm). Make sure your control line matches this limit.
  • Load requirement: The stated maximum working load is 500 lb (227 kg). Compare that figure with the load expected in your rigging.
  • Space available: The block is 2 in. (51 mm) long. Check the mounting area and nearby hardware for fit.
  • Block style: This is a single wire bullet block. Confirm that this block style matches the control line application you are setting up.

Before You Decide

Confirm the single wire bullet block style, the 5/16 in. maximum line diameter, and the 500 lb maximum working load before choosing an offer. The 2 in. length and 1 oz. weight are also useful checks if space and overall setup weight matter to your rigging.

Reviews

There are no reviews yet.

Be the first to review “Harken Bullet Blocks Single Wire Bullet Block”

Your email address will not be published. Required fields are marked *

Scroll to Top