Quick Summary
The 6699 Automatic Boat Bilge Pump BGP 1500 is a 12V pump for moving water out of a boat. The stated flow rate is 1500 GPH, and the product includes automatic and manual modes for operation.
It is described as having a 1/10HP motor, a built-in float switch, and a 1-1/8 inch (29 mm) outlet. Those details matter if you are checking power, discharge hose connection, and how the pump is intended to switch on and off.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Product type | Automatic boat bilge pump for water removal. |
| Model | 6699 / BGP 1500. |
| Power | 12V, with a stated current of 3.5A. |
| Flow rate | 1500 GPH, which is the main capacity figure to compare for draining needs. |
| Motor | 1/10HP motor. |
| Outlet diameter | 1-1/8 inch (29 mm) outlet for hose connection. |
| Modes | Automatic mode and manual mode. |
| Included item | 1 stainless steel clamp is included. |
What to Compare Before Buying
- Power supply: This pump is stated as 12V. Compare that with the power setup in the boat or other intended application.
- Flow rate: The stated capacity is 1500 GPH. Check whether that matches the amount of water you want to move.
- Outlet size: The outlet is 1-1/8 inch (29 mm). Make sure the discharge hose and connection setup match.
- Mode choice: Automatic and manual modes work differently. Decide which control style fits your setup.
- Included clamp: One stainless steel clamp is included. Confirm whether any additional hose or fittings are needed for your installation.
Compatibility, Size and Fit
This pump is described for boats and other water-removal uses. The outlet size and 12V power make it important to match the pump to the hose connection and electrical setup you already have.
If you are comparing it for another application, check the outlet diameter, power requirement, and whether the automatic or manual mode matches the way you want the pump to operate.
What Else You May Need
A discharge hose and any additional fittings needed to complete the connection are the main items to check before installation.
Before You Decide
Confirm the 12V power requirement, the 1500 GPH flow rate, and the 1-1/8 inch outlet before choosing an offer. Also check whether automatic mode, manual mode, and the included clamp match your planned setup.
A Simple Setup Check
Before installation, plan the hose route and the power connection together. That makes it easier to confirm that the outlet size, wiring, and mode selection all line up with the space and layout you already have.
For automatic operation, the product uses a built-in float switch. For manual operation, it runs until power is cut off. The wiring instructions differ by mode, so the selected mode should match the way the pump will be connected.
Common Buyer Questions
What size outlet does it use?
The outlet is 1-1/8 inch (29 mm).
Does it have more than one operating mode?
Yes. It is described with automatic mode and manual mode.
Is anything included for hose connection?
One stainless steel clamp is included.
Reviews
There are no reviews yet.